STANDARD BASIC (PRIMARY) PATTERNMAKING BLOCKS
Learn to Create the STANDARD BASIC (PRIMARY) PATTERN SET in 4 WEEKS
PS: This is Patternmaking Class Only
The three Primary Blocks are the Bodice, The Straight Sleeve and the Straight Skirt
The STANDARD BLOCKS are the Basic Foundation which follows the Natural lines of the figure and is little influences by other considerations.
Its main objective is to provide a reliable and lasting basis of correct proportions and fit, from which more specialised Blocks can be produced.
The Standard Block is the Basis from which other foundation are developed.
It is used for all high-class individual (Bespoke) work, involving fitting.
It is also the Most suitable Block for creating Advanced Blocks.
PS: We have included How to Draft the BASIC TROUSER BLOCK. This is an Intermediate or Advanced Block as some Authors refer to it
WHAT YOU WILL LEARN
1) How to take Accurate Bodice, Skirt, Sleeve and Trouser measurements
2) Construction of the Basic Bodice (Torso) Blocks
3) Construction of the Basic Straight Skirt Blocks
b) Shaped-Straight Block
c) A-Line Foundation
4) Construction of the Basic Straight Sleeve
5) Construction of the Basic Trouser Blocks.
PS: Test-Fit of these Blocks is recommended but Optional.
Test-Fits must be submitted during the duration of the Course Only
Class duration is 4 Weeks. Course opens for 3 Months